YSİB
Automatic Fire and Explosion Suppression System
YSİB
Presentation Download File
Presentation Download File
UV/IR detectors installed on armored personnel vehicles send a signal to the control box when a flame is detected, activates extinguishers in the personnel section.
Optical UV/IR Detector
Control Panel
High Speed Extinguishers
Key Features
- Triple sensors, 1 UV/ 2 IR
- High speed detection - less than 3 milliseconds
- High speed gas release - in less than 8 milliseconds
- Extinguishing time in less than 250 milliseconds
- High susceptibility to slowly developing fires
- Power & error signals
- Controlled manual activation button
- Optional secondary manual activation button
- High sensitivity to false alarms
- Minimum 50,000 hours of fault-free operation
- CANBUS communication system
- Tested for military and industrial use.
Optical UV/IR Detectors
- The detector controls flame emission with UV and IR wavelengths.
- An IR detector is also used to detect major heat sources to prevent false alarms.
- Can detect and verify flame in less than 3 ms, with CANBUS communication interface.
 |
 |
|
Optic UV/IR Detector |
Mini Optic UV/IR Detector |
High Speed Extinguishers
Extinguishers contain combination of environmentally friendly fire suppression gas HFC227-EA (FM200). The special design of the main valve tube and nozzle ensures fast and homogeneous distribution of the suppression gas in the protected area. Extinguishers are available in different volume variations, and the main valve assembly includes various security features such as a safety relief valve.
- High ignition rate in less than 2 ms
- Hermetically sealed valve
- Rapid release of explosion suppression gas (<8 ms)
- Pressure sensor with high precision and accuracy
- Reliable dry-type manometer
- Minimum 50,000 hours of fault-free operation
- Meets requirements for military use
Contact us for more information about Automatic Fire and Explosion Suppression System